Ask.
Describe the screen you want in a sentence.
DigiWarehouse · Operator screens
Operator screens for every door, conveyor and cold room, drawn from your equipment list.
Connect the equipment and DigiOS draws the standard set: an overview of the building, a screen for each area, a screen for each piece of equipment with its faceplates and trends, and the alarm summary. Change them in a screen builder, or ask an assistant to draft one for an engineer to approve.
The standard set
One frame, four views of the same building.
The whole building at once.
Every area with its state, its alarms and its work. Colour appears only where something is wrong.
Alarms4 activeShelved2Handhelds6 online, 1 without signal
Dock3 of 6 doors in use2 trucks in, 1 outCold room 17.2 °C, limit 5.0Compressor trippedCold room 23.4 °CDoor ajar, shelvedLine 2RunningLane 3 full
InfeedRunningScanner S2ReadingScale3.12 kgSorter SD-2010.82 m/sLane 1142 parcelsLane 239 parcelsLane 3FullLane 43 parcels
Speed0.82m/sSet to 0.80Motor current6.1ADrive temperature48°C
Limits are drawn across the trend. A point past a limit is marked in red; nothing else on the sheet is coloured.
One area, with its equipment.
Dock doors, a conveyor section or a cold room, each as a tile with its state and the order or stock it is holding.
Alarms4 activeShelved2Handhelds6 online, 1 without signal
Dock3 of 6 doors in use2 trucks in, 1 outCold room 17.2 °C, limit 5.0Compressor trippedCold room 23.4 °CDoor ajar, shelvedLine 2RunningLane 3 full
InfeedRunningScanner S2ReadingScale3.12 kgSorter SD-2010.82 m/sLane 1142 parcelsLane 239 parcelsLane 3FullLane 43 parcels
Speed0.82m/sSet to 0.80Motor current6.1ADrive temperature48°C
Limits are drawn across the trend. A point past a limit is marked in red; nothing else on the sheet is coloured.
A screen for each machine.
A faceplate with the reading, the setpoint and the controls you allow.
Alarms4 activeShelved2Handhelds6 online, 1 without signal
Dock3 of 6 doors in use2 trucks in, 1 outCold room 17.2 °C, limit 5.0Compressor trippedCold room 23.4 °CDoor ajar, shelvedLine 2RunningLane 3 full
InfeedRunningScanner S2ReadingScale3.12 kgSorter SD-2010.82 m/sLane 1142 parcelsLane 239 parcelsLane 3FullLane 43 parcels
Speed0.82m/sSet to 0.80Motor current6.1ADrive temperature48°C
Limits are drawn across the trend. A point past a limit is marked in red; nothing else on the sheet is coloured.
A trend, with its limits.
Any reading over any window, with its alarm limits and the alarms that fired along it.
Alarms4 activeShelved2Handhelds6 online, 1 without signal
Dock3 of 6 doors in use2 trucks in, 1 outCold room 17.2 °C, limit 5.0Compressor trippedCold room 23.4 °CDoor ajar, shelvedLine 2RunningLane 3 full
InfeedRunningScanner S2ReadingScale3.12 kgSorter SD-2010.82 m/sLane 1142 parcelsLane 239 parcelsLane 3FullLane 43 parcels
Speed0.82m/sSet to 0.80Motor current6.1ADrive temperature48°C
Limits are drawn across the trend. A point past a limit is marked in red; nothing else on the sheet is coloured.
Drawn by hand, and drawn from the list
A new conveyor
Drawn by handSomeone draws its screen, its alarms and its trend, usually later.
Drawn from your equipmentAdd it to the list and its faceplate, alarms and trend appear with it.
The same pump
Drawn by handThree screens with three layouts.
Drawn from your equipmentOne faceplate for the type, used everywhere it appears.
Colour
Drawn by handEvery state has its own, so nothing stands out.
Drawn from your equipmentA grey stage. Colour is for what is abnormal.
On a phone
Drawn by handA shrunken desktop screen.
Drawn from your equipmentA list of equipment with its state, and the alarms to acknowledge.
A screen builder, for the screens only you need.
Place a tile, a trend or a faceplate, and bind it to a reading with its unit. Each widget shows where its number came from, how old it is and whether the reading is good. A published screen changes only through approval.
- Your own screens beside the standard ones, kept when DigiOS updates.
- Saved views for a shift, a supervisor or a wall.
Write off 12 × FH-2041 Ceramic planter 24 cmWaiting for Priya
Cancel order SO-48190Waiting for Priya
Move ownership of 120 × OB-1204 Oat bar 12-packWaiting for Priya
Write off 12 × FH-2041 Ceramic planter 24 cm
12 planters arrived cracked on ASN-7742 at door 3. Photographed (3) and set aside in the damage area. Requested by Nadia at 10:31.
| What will change | Before | After | Status |
|---|---|---|---|
| On hand, all locations | 960 | 948 | Not yet |
| Damage hold | 12 | 0 | Not yet |
| Available to order | 884 | 884 | Not yet |
| Charge to Wrenfield Home | None | Disposal, 1 line | Not yet |
ApproveRejectAsk Nadia
PriyaOperations manager
Approving applies exactly the changes above, once. Nobody else can approve it, and automation cannot.
Nadia asked for the write-off, with 3 photos.
Handheld H-05
An assistant drafts it. An engineer approves it.
Ask for a view of cold room 2 and its door, and the assistant drafts the screen from your equipment list. Nothing it drafts goes live until a named person says so.
Review.
An engineer reads the draft, edits it and sees every reading it binds.
Approve.
A named person approves it, and only then does it go live.
Colour means something is wrong.
Screens follow ISA-101: a calm grey stage, colour only for what is abnormal, and every number with its unit, its age and where it came from.
For the desk, the phone and the wall
On the desk.
The full building, area by area, with a docked alarm summary and a trend beside the equipment you picked.
On the phone.
A list: each piece of equipment with its state, the alarms waiting, and a button to acknowledge. No free-form canvas to pinch.
On the wall.
The building level only, in large type, with no controls and a loud banner when the data is stale.
Questions
Do we have to draw every screen?
No. The standard set comes from your equipment list. You draw only what is special to you.
Can the assistant change a live screen?
No. It drafts. An engineer approves, and only then does the screen go live.
Which devices show them?
A current browser on a desktop or a tablet, a phone for the list view, and a wall display for the building level.
Tell us what's on your floor.
We'll show you the overview, the area screens and one faceplate drawn from it.